Explore our garment sewing patterns, suitable for sewers of all skill levels. Find an array of options to sew everything from on-trend trousers to stylish tops. These garment patterns, crafted by renowned designers, provide the downloadable patterns and instructions you need to bring a wide range of wardrobe essentials to life. Whether you're a seasoned sewist or complete beginner, our quick and easy sewing tutorials make it easy to tackle garment projects with confidence, and learn techniques such as how to create pleats and how to insert sleeves. From casual everyday wear to special occasion ensembles, learn to sew clothing that flatters your figure and aligns with your unique style today.
Front: cut one pair
Back: cut one on the fold
Front facing: cut one pair
Back neck facing: cut one on the fold
Collar: cut one pair
Sleeve: cut one pair
1.5cm seam allowance used throughout.
Front: cut one on the fold
Front side panel: cut one pair
Back: cut one pair
Sleeve: cut one pair
Pocket bag: cut one pair
1.5cm seam allowance used throughout except for at the neckline, where 1cm is used.
MAIN FABRIC
Front bodice: cut one on the fold
Back bodice: cut one on the fold
Front skirt: cut one on the fold
Back skirt: cut one on the fold
Sleeve: cut one pair
CONTRAST FABRIC
Collar facing: cut two on the fold
Pocket: cut one pair
1.5cm seam allowance used throughout.
Note: start by taking your waist and hip measurements. The largest of these will be meas A
Back panel: cut one (divide meas A by four, add 4cm = width) x (desired length* plus 4cm = length) on the fold from printed corduroy
Front panel: cut two (divide meas A by four, add 12cm = width) x (desired length* plus 4cm = length) from printed corduroy
Pocket: cut two 20cm x 27cm rectangles each from plain corduroy and lining fabric
Waistband: cut one 6cm x (waist meas x 1.5, plus 1.3m) strip from plain corduroy
*Natural waist to hem length
1.5cm seam allowance used throughout.
COTTON
Upper front: cut one pair
Upper back: cut one on the fold
Sleeve: cut one pair
Collar: cut one pair
Centre tab: cut one 4cm x 8cm rectangle
CREPE
Lower front: cut one on the fold
Lower back: cut one on the fold
1.5cm seam allowance used throughout.
Front: cut one
Back: cut one
Frill: cut two
Neck binding: cut a bias strip, 5cm x 90cm
Armhole binding: cut a bias strip, 5cm x 45cm
Shoulder strap: cut a strip, 5cm x 45cm
1.5cm seam allowances are used throughout except for the neckline where 1cm is used.
Front: cut one pair in fabric and lining
Back: cut one on the fold in fabric and lining
Sleeve: cut one pair in fabric and lining
Pocket: cut two pairs from fabric
Collar: cut one on the fold in ribbing
Sleeve cuffs: cut two 18cm x 20cm pieces from ribbing
Waistband: cut a 18cm x 66cm piece from ribbing
1.5cm seam allowance used throughout.
Front: cut one on the fold
Back: cut one pair
Sleeve: cut one pair
Pocket: cut two
Neck band: cut one 4cm x 58cm strip on the bias
1.5cm seam allowance used unless otherwise stated.
Note: begin by taking your hip measurement
Front/back: cut four (quarter of hip plus 24cm) x 72cm rectangles
Neckband: cut one 5cm x 74cm strip on the bias
Cuff: cut two 10cm x 45cm strips
Belt: cut one 14cm x 152cm strip
Belt loops: cut two 3cm x 10cm strips
1.5cm seam allowance used unless otherwise stated.
TOP: cut from chambray
Front/back: see cutting diagram, cut two on the fold
Neck binding: cut one 4cm x 72cm strip on the bias
SKIRT: cut from jersey
Front/back: cut two on the fold (one quarter of your hip measurement + 1.5cm) x (desired length + 3cm)*
*If doubling fabric, lay the pattern piece or draw straight onto fabric that has been folded widthways, then lengthways.
1.5cm seam allowance used throughout.
Note: start by taking your waist and hip measurements
Pants (for front/back): cut one pair* on the fold (hip measurement + 30cm, divided by 4) x 95cm
Waistband: cut one strip 24cm x (waist measurement + 9cm)
Leg cuff: cut two 12cm x 26cm strips
*The pants front piece is cut 2cm lower at the top than the back
The following is based on a size 10-12 (92cm hip, 68cm waist).
Pants: (92 [hip] + 30cm, ÷ 4 = 30.5*) 30.5cm x 95cm (95cm is length, adjust if needed)
Waistband: 24 x (68 [waist] + 9** = 77) 24cm x 77cm * Extra 7.5cm (the +30cm ÷ 4) width on the hip is for ease (6cm), plus seam allowance (1.5cm)
** Extra 9cm width on the waistband is for ease (6cm) plus seam allowance (3cm)
1.5cm seam allowance used.
Front: cut two 58cm x (waist ÷ 2 + 42.5cm) pieces from fabric
Back: cut one 58cm x (waist ÷ 4 + 40cm) piece each from fabric
Tie: cut two 30cm x 1m strips from fabric
1.5cm seam allowance used unless otherwise stated.
Note: begin by taking your bust and waist measurements. The largest of these will be measurement A. The width of the front/back piece will be measurement B. Cut out all pieces with height measurement on the fold
Dress front/back: cut two (divide meas. A by four, add 3.5cm = width) x (desired length minus 18.5cm^ = height) on the fold from jersey
Neckband: cut one 4.5cm x 56cm* strip from jersey
Top insert: cut two (meas. B = width) x 18.5cm (height) pieces on the fold from lace
Middle insert: cut two (meas. B = width) x 8cm (height) pieces on the fold from lace
Bottom insert: cut two (meas. B = width) x 10.5cm (height) pieces on the fold from lace
^ See Do The Maths panel
*If using a fabric with less stretch, you may need to add an extra 2cm to the neckband length.
1.5cm seam allowance used unless otherwise stated.
Skirt: cut one 150cm x (desired length plus 4.5cm) piece from fabric
Waistband: cut one 10cm x (waist measurement plus 8cm) strip each from fabric and interfacing
Pocket: cut two 21cm x 23cm rectangles from fabric
1.5cm seam allowance used throughout.
Coat back: cut one on the fold
Coat front: cut one pair
Front & back sleeve: cut one pair of each
Front facing: cut one pair
Under collar: cut one on the fold
Pocket: cut one pair
1.5cm seam allowance used throughout unless otherwise stated.
